Subtotal: Rs.0.00
Optical Line Terminal 4 PON Port +10G +L3+ Single Power Supply
NTPL-OLTEPN410G
Nepstech Optical Line Terminal 4xGE Copper and 2x1G SFP Slot and 2x10G SFP+ Slot + Single Power Supply
- Meet IEEE 802.3x standard and relative EPON standards of Chinese CommunicationIndustry
- Support OAM remote management for ONT/ONU, compatible with IEEE 802.3x OAMProtocol
- 1U height 4PON OLT product in compact design of Pizza-Box
- Layer 2 Switching Function
- Warrenty period: 1 years
OLT equips with very powerful layer 2 Full Wire Speed Switching and completely supports layer 2 protocol. OLT supports varieties of layer 2 functions like TRUNK, VLAN, rate limit, port isolate, queue technology, flow control technology, ACL and so on, which provides technical guarantee for the development of multi-service integrated.
- QOS Guarantee
It can provide various QoS for EPON system, which can meet different QoS requirements for delay, jitter, and packet loss rate of different service flows.
- Easy-to-Use Management System
Support management method of CLI, WEB, SNMP, TELNET, SSH and meet OAM standard, through OAM channel protocol service management can be realized, including ONT function parameter set, Qos parameters, configuration information request, performance statistics, auto-reporting of running events in system, configuration for ONT from OLT, fault diagnosis and management of performance and safety.
|
Item |
|
|
|
Chassis |
Rack |
1U 19-inch standard box |
|
Uplink Port |
QTY |
10 |
|
Copper |
10/100/1000M auto-negotiable, RJ45:4pcs |
|
|
Optical interface |
4 GE |
|
|
10Gb uplink interface |
2*10Gb |
|
|
PON Port |
QTY |
4 |
|
Physical Interface |
SFP Slots |
|
|
Connector Type |
1000BASE-PX20+ |
|
|
Max splitting ratio |
0.086111111 |
|
|
USB Port |
QTY |
1 |
|
Connector Type |
Type-C |
|
|
Function |
Similar to the CONSOLE port function, used for serial port login |
|
|
Management Ports |
1*100BASE?TX out band port; 1 CONSOLE port |
|
|
PON Port Specification |
Transmission Distance |
20KM |
|
PON port speed |
Symmetrical 1.25Gbps |
|
|
Wavelength |
1490nm TX,1310nm RX |
|
|
Connector |
SC/PC |
|
|
Fiber Type |
9/125μm SMF |
|
|
TX Power |
+2.5?+7dBm |
|
|
Rx Sensitivity |
-27dBm |
|
|
Saturation Optical Power |
-6dBm |
|
|
10Gb SFP+ Port Specification |
Transmission Distance |
10KM |
|
PON port speed |
8.5-10.51875Gbps |
|
|
Wavelength |
1310nmTX?1310nmRX |
|
|
Connector |
LC |
|
|
Fiber Type |
Single mode with dual fiber |
|
|
TX Power |
-8.2~+0.5 dBm |
|
|
Rx Sensitivity |
-12.6dBm |
|
|
Management Mode |
SNMP, CLI,Web management mode. |
|
|
Management Function |
Fan Group Detecting |
|
|
Port Status monitoring and configuration management; |
||
|
Layer-2 switch configuration such as Vlan, Trunk ,RSTP,IGMP ,QOS, etc; |
||
|
EPON management function: DBA ,ONU authorization, ACL ,QOS ,etc; |
||
|
|
Online ONU configuration and management |
|
|
User management |
||
|
Alarm management |
||
|
Layer-two Switch |
Support port VLan and protocol Vlan |
|
|
Support Vlan tag/Untag ,vlan transparent transmission; |
||
|
Support 4096 VLAN |
||
|
Support 802.3dd trunk |
||
|
RSTP |
||
|
QOS based on port ,VID,TOS and MAC address |
||
|
IGMP Snooping and proxy |
||
|
802.x flow control |
||
|
Port stability statistic and monitoring |
||
|
EPON Function |
Support port-based rate limitation and bandwidth control; |
|
|
In compliant with IEEE802.3ah Standard |
||
|
Up to 20KM transmission Distance |
||
|
Support data encryption, group broadcasting, port Vlan separation, RSTP, etc. |
||
|
Support Dynamic Bandwidth Allocation (DBA) |
||
|
Support ONU auto-discovery/Link detection/remote upgrade of software; |
||
|
Support VLAN division and user separation to avoid broadcast storm; |
||
|
configuration .Different user and different service could provide different QoS by means of different LLID channels. |
||
|
Support power-off alarm function ,easy for link problem detection |
||
|
Support broadcasting storm resistance function |
||
|
Support port isolation between different ports |
||
|
Support ACL and SNMP to configure data packet filter flexibly |
||
|
Specialized design for system breakdown prevention to maintain stable system |
||
|
Support dynamic distance calculation on EMS online |
||
|
Layer-three Route |
Support static router |
|
|
Backplane Bandwidth |
56G |
|
|
Dimension |
440*2300*44(mm*mm*mm? |
|
|
Weight |
4kg |
|
|
Power Supply |
220VAC |
AC: 90V?240V?47/63Hz |
|
-48DC |
DC:-36V?-72V |
|
|
Support BBU |
AC: 11V?14V |
|
|
|
|
Function: When the regular power supply is cut off, it can be switched to the backup power supply, and when the regular power supply resumes, it will switch back to the regular power supply and charge the backup power supply. |
|
Power Consumption |
43W |
|
|
Operating Environment |
Working Temperature |
-15?55? |
|
Storage Temperature |
-40?85? |
|
|
Relative Humidity |
5?90%(non-condensing) |
|